Stainless Steel Wire Mesh

Specifications

Material: 304, 316, 316L, 430 stainless steel (430 is magnetic, with lower corrosion resistance than 304/316); 310S, 2205 and 2507 by order

Product Type: Woven stainless steel mesh (main product), welded stainless steel mesh by order

Weaving Method: Plain weave, twill weave, plain Dutch weave

Mesh Count: 2 mesh to 500 mesh for common woven mesh

Wire Diameter: about 1.8 mm to 0.025 mm for the listed plain weave range

Aperture: Depends on mesh count and wire diameter. For example, 20 mesh × 0.30 mm wire has about 0.97 mm aperture.

Plain Weave Sizes: 2 mesh × 1.8 mm, 10 mesh × 0.55 mm, 20 mesh × 0.30 mm, 60 mesh × 0.15 mm, 100 mesh × 0.10 mm, 200 mesh × 0.053 mm, 500 mesh × 0.025 mm

Twill Weave Sizes: 100 mesh × 0.14 mm, 150 mesh × 0.09 mm, 200 mesh × 0.06 mm, 300 mesh × 0.04 mm, 400 mesh × 0.03 mm, 500 mesh × 0.025 mm

Plain Dutch Weave Sizes: 80 × 300, 80 × 400, 50 × 250, 40 × 200, 24 × 110, 20 × 150, 12 × 64 (warp mesh × weft mesh)

Roll Width: 1.0 m, 1.2 m and 2.0 m are common. Wider rolls can be discussed according to mesh count and weaving type.

Roll Length: Common 30 m per roll

Cutting Service: Sheets, strips, discs, filter cones and pleated filter parts can be made by drawing or sample.

Surface: Plain stainless steel surface, no galvanized coating

Packing: Waterproof paper, plastic film, wooden case or pallet packing according to order size